 | toll free: 877.888.0999 USA  |
     | |
 Sitemap email for best pricing: sales@proaudiosuppliers.com |
CROWN-IT 6000 High Power Professional Amplifier |
WHERE POWER IS NEEDED The world has seen many good amplifiers, but few achieve greatness. What sets these elite few apart from all the others? The answer is simple: A careful synthesis of unrivaled sonic performance combined with rock-solid dependability. While the definition of a great amplifier may be simple, delivering on those requirements is not. This is what has always set Crown amplifiers apart from the others: Crown delivers. From the slightest nuances in the tremolo of a flute to the chest pounding bass of a rock ’n’ roll kick drum to the harmonic rich vocals of a jazz singer, Crown delivers. Crown amplifiers are renowned for their ability to accurately amplify anything audio—with unmatched power and accuracy—night after night without fail. For decades, the formula for creating great amplifiers has been the same at Crown: An insightful combination of genetics, breakthrough technologies, craftsmanship, and passion. This formula, proven over and over, has produced a lineage of great amplifiers: DC-300, PSA-2, Micro-Tech®, Macro-Tech®, Studio Reference™, K, and CTs: Each amplifier great in its time, and each raising the standard for high performance. Once again, this formula for greatness has delivered on its promise: I-Tech, the world's next great amplifier, and the pinnacle of Crown's 50-year history of innovation. Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25dB. Signal to Noise Ratio below rated 8-ohm power, A-weighted: >105 dB Total Harmonic Distortion (THD) at full rated power: < 0.35%. Damping Factor (20 Hz to 100 Hz): > 5000. Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB. DC Output Offset: < ±3 mV. Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced. Maximum Input Level: +15 dBu or +22 dBu, depending on input sensitivity. Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz). A/D, D/A Converters: 24-bit, 96-kHz Cirrus Logic. Digital Input: AES/EBU, 16-24 bit, 32-48 kHz. Onboard sample rate converter. Optional CobraNet input coming soon. Network: Onboard TCP/IQ, compatible with standard 100-Mb Ethernet hardware. DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Bypass mode available. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators. Load Supervision: Monitors the average impedance on the output of the amplifier. If the impedance falls outside the specified high/low limits, this function alerts the user via the front panel display, and via the IQwic software when amp is on an IQ Network. Error Reporting: Reports clip errors, thermal errors, fault conditions and load monitoring errors for each channel via the front panel display and via IQwic software when amp is on an IQ Network. Attenuators: Speed sensitive, continuously variable rotary encoder, 0.5 dB steps, range 0 to –100 dB. Load Impedance (Note: Safe with all types of loads): Stereo: 1/2/4/8/16 ohms. Bridge Mono: 2/4/8 ohms. Input Sensitivity: Adjustable in 0.1V steps from 1.4V to 9.7V. Voltage Gain (referenced to 8 ohm rated output): I-T4000: 37.0 dB to 20.3 dB I-T6000: 37.9 dB tp 21.0 dB I-T8000: 39.3 dB to 22.5 dB Required AC Mains: Universal AC input, 100-240 VAC, 50/60 Hz (±15%). Maximum AC mains voltage: 277 VAC. AC Line Connector: Five cordsets supplied with amplifier (USA, UK, Europe, Australia, India). |
| We provide great low prices for professional audio video and lighting for churches and stage From bose speakers to Yamaha digital mixers |
 © 2006 ProAudioSuppliers.com. All Rights Reserved.Privacy » User Notices |
• Sale Items • Amp Comparison • Mixer Shoot Out •