Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.
CTs 3000 Performance
• Frequency Response (at 1 watt, 20Hz - 20 kHz) ±0.25 dB
• Phase Response (at 1 watt, 10Hz - 20 kHz) ±20°
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz) <-102 dB A-weighted
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz <0.05%
• Damping Factor 10 Hz to 400 Hz >500
• Crosstalk (below rated power, 20 Hz to 1 kHz) >80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz) >50 dB
• DC Output Offset (Shorted input) <10 mV
• Input Impedance nominally balanced, nominally unbalanced 20 k ohms, 10 k ohms
• Maximum Input Level (before input compression) +20 dBu Load Impedance (Note: Safe with all types of loads)
• Stereo 2, 4, 8, 3 (70V), and 8 ohms (100V)
• Bridge Mono 4, 8, 16, 8 (140V), and 13 ohms (200V)
• Voltage Gain (at maximum level setting), 1.4V sensitivity, 4/8 Ohm Operation 42.2:1 (33 dB)
• 70V Operation 39:1 (32 dB)
• 100V Operation 39:1 (32 dB)
• Required AC Mains 120V 60 Hz, 220/230/240V/50 Hz Power Draw at Idle (120VAC mains):
• All channels in 4/8 ohm mode 24W (Standby Mode)
• All channels in 70V mode 24W (Standby Mode)
• Cooling Variable-speed forced air Dimensions:
• Width, 19 in. (48.3 cm.)
• Height, 3.5 in. (8.9 cm.)
• Depth 14 in. (35.6 cm.)
• Net Weight 26 lb (11.8 kg)
|
Sitemap 
© 2006 ProAudioSuppliers.com. All Rights Reserved.