 | toll free: 877.888.0999 USA  |
     | |
 Sitemap email for best pricing: sales@proaudiosuppliers.com |
CROWN-CH2 Professional Commercial Amplifier |
Crown delivers the "Contractor Series" CH2 designed for both low and high impedance outputs per channel. With the CH2, each channel is independently capable of 4/8 ohm, 70V or 100V operation. Features Drives multiple impedances, with both low impedance and high impedance outputs per channel High-pass filter for each channel provides low-frequency roll off to eliminate stop down transformer saturation when used in 70V and 100V distributed systems Shallow chassis design, allowing for isntallation in most wall-mount racks Rear panel detented level controls allow for accurate level settings and secure operation "Contractor-Correct" barrier strip output connectors allow for quick and easy connection, regardless of the load Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Can be mounted in standard 19" rack, shallow 14" rack, or stacked on top of each other Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown's Profit Protection Plan guarantees quick, no-questions-asked replacement of your covered Contractor Series amplifier should it fail at any time up to 6 months following date of installation Power 4 ohm Stereo (per channel): 660W 8 ohm Stereo (per channel): 400W 70V Stereo (per channel): 600W 100V Stereo (per channel): W 8 ohm Bridge-Mono: 1,320W 140V Bridge-Mono: 1,200W Specifications Load Impedance: Safe with all types of loads; 4 & 8 ohm stereo; 8 ohm at 70V stereo; 4, 8 & 16 ohm bridge; 16 ohm at 140V bridge; 32 ohm at 200V bridge Frequency Response: 20Hz to 20kHz at 1 watt: +/-0.1 dB Phase Response: +/-15 degrees deviation from linear phase from 20Hz to 20kHz at 1 watt Signal to Noise Ratio, A-Weighted: Better than 105 dB THD, 1kHz at rated power: 0.5% or less Intermodulation Distortion (60 Hz and 7 kHz at 4:1): Less than 0.1% Damping Factor (8 ohm): Better than 400 Crosstalk, 20Hz to 20kHz: Better than 50 dB below rated power Common Mode Rejection (CMR): Better than 40 dB from 20Hz to 1kHz DC Output Offset (shorted input): <+/-10mV Dimensions (W x H x D): 19" x 5.25" x 12.25" Net Weight: 48.3 lbs Shipping Weight: 56.3 lbs |
| We provide great low prices for professional audio video and lighting for churches and stage From bose speakers to Yamaha digital mixers |
 © 2006 ProAudioSuppliers.com. All Rights Reserved.Privacy » User Notices |
• Sale Items • Amp Comparison • Mixer Shoot Out •