
Engineered from the ground up for unmatched quality and performance, the Crown® DSi Series of power amplifiers offers three models of 500W, 800W, and 1200W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor.
The intuitive front panel LCD screen guides installers through a setup process—featuring presets for the industry-standard JBL cinema loudspeaker systems—to make configuration quick and easy.
At the touch of a button, Crown’s DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.
Output Power:
2-ohm Stereo (Per Channel): 1000W
4-ohm Stereo (Per Channel): 800W
8-ohm Stereo (Per Channel): 475W
4-ohm Bridged-Mono: 2000W
8-ohm Bridged-Mono: 1600W
Features:
Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
Automatic presets for popular JBL cinema speaker systems for quick, easy configuration
Intuitive front-panel LCD screen guides installers through setup
Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
Computer connectivity via USB allows fast setup and configuration with HiQnet™ System Architect™ software
Rear-panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and new DSi-8M System Monitor
Switch-mode universal power supply
All products fill 2U rack spaces and weigh under 19 pounds
Barrier strip outputs, removable Phoenix-style input
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Performance:
Voltage Gain at 1kHz, 8 ohm rated output:
DSi 1000: 26 dB
DSi 2000: 26 dB
DSi 4000: 26 dB
Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Phase Response (at 1 watt, 20 Hz to 20 kHz): ±15°.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity:
At 8 ohm rated output:
DSi 1000: 2.35V
DSi 2000: 3.09V
DSi 4000: 3.61V
At 4 ohm rated output:
DSi 1000: 2.24V
DSi 2000: 2.84V
DSi 4000: 3.47V
At 2 ohm rated output:
DSi 1000: 1.88V
DSi 2000: 2.24V
DSi 4000: 2.84V
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB (A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz.
Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Configurations Available: 100V, 120V-240V, 50/60 Hz.
AC Line Current:
DSi 1000: 6.5A
DSi 2000: 6.9A
DSi 4000: 8.0A
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
|